- Wood Choices Cedar or Pressure Treated
- Pre-Staining Jarrah Brown, Natural, Mahogany Flame, or Honey Teak
- Option Straight or Arched
- Heights 3′, 4′, or 5′
- Hinges 8" Tee-Hinge
- Latches Paddle Latches
- Gate Types Walk or Double
These Premium Steel Hinges include hinge pins in case the gate needs to be temporarily removed.
Wood Gates come with a lockable Finger and Paddle Latch system that allows for access from either side of the gate.
Wood Walk Gates are for openings 24" to 48" wide. All Fence-All Wood Walk Gates 5' high and over include a 2x4 brace.
A Double Gate is best for entrances between 4' and 8' wide. It includes a cane bolt that stabilizes one of the gates in a fixed position. All Fence-All Wood Double Gates 8'w and wider include a 4x4 brace.
Upgrade your posts with Postsaver Pro-Sleeves. They're heat-shrinkable sleeves with a meltable liner that protect wood posts from rot and decay around the vulnerable ground line area. Pro-Sleeves carry a 20 year manufacturer warranty.
An Extra Gate Handle is the solution if you're looking for easy access from both sides.
An Overhead Gate Brace is a simple way to add strength and stability.
A Capped Brace adds more style to the basic Overhead Brace.
The Newport Brace is our most ornate Wood Brace option.
Our Milled Post Upgrade is sometimes confused with our Cap Option. The difference: With milled, the cap shape is carved directly out of the post for a one piece assembly that has no seam.
Available in 6×6 and 8×8 sizes as well as wrapped, Larger Posts add to the look and increase the strength of the overall fence/gate system. Fluting is an ornate touch that can be added to wrapped posts.
Screw Piles are posts that are turned into the ground by machine as opposed to the usual digging and cementing process. They are a requirement for most deck permits.
A Diagonal Floor Board pattern adds elegance to any deck.
Iron Walk Gates come with a set of adjustable Post and Frame Collars.
Folding Gates have special hinges that allow the gate panels to be folded into each other. It's a helpful modification to wider gates when space is at a premium.
Iron Walk Gates come with a lockable Finger and Catch System.
Most iron gates can be Straight or Arched. The upper photo shows a Straight Staten Gate and the lower photo shows an Arched Stamford Gate (arched gates typically rise 6" above the the height of the fence).
Add an Ornamental Gate Handle w/Mount Box. Comes complete with an attractive cylinder and key locking system. Note: can't be added to gates that are already installed.
Protect your toddlers with a Child-Proof Magnetic Latch. The height of the Unlock Button keeps it well out of reach of curious youngsters.
The Add a Rail Upgrade increases the strength and durability of any iron fence.
Aluminum Gates weigh less and provide better rust resistance. They are available as an upgrade for most (but not all) fence styles. Ask your sales rep for details.
Our Estate Gates have options for gate operators, automated telephone systems, custom sized pillar posts, specialty hardware, and our "wood over steel" or "wood over aluminum" framing techniques.
Aluminum Flower Basket Hangers are an attractive addition to any iron fence. The size is typically 18"w (out from the fence) by 8"h. Ask your sales rep for details.
Portable Fence Plates are the perfect solution for fencing off patios. They're typically used by restaurants and other businesses as opposed to the average home owner.
The simplest and most cost effective way to make a stronger chain link fence is to add line posts. They strengthen top rail support and reduce top rail sagging. We strongly suggest this option if 1) you plan to add privacy slats or 2) your fence will have snow piled near it (NEVER on it) or 3) your fence has long, straight runs where top rail sagging can become more obvious.
If your fence is going to be pushed a little more than usual larger Posts and Rails are the answer. They cost a few dollars more per foot but it's less expensive than replacing the entire fence in only a year or two because it wasn't strong enough for its particular application.
Add a Continuous Bottom Rail is a more economical version of Add a Rail. A top rail is tied to the outside of the fence along the bottom.
Adding a rail is a popular feature with pet owners. It makes it harder for dogs to dig under the fence and escape.
Our Under-Fence Gap Protection covers up spaces at the bottom of the fence when there are changes in grade. The boards are stuck into the ground, not directly attached to the fence. This prevents the fence from heaving due to seasonal changes.
4' and 6' Maximum Wide Panels mean a stronger fence and the opportunity for less space between the bottom of the fence and the ground. It's very popular with pet-friendly families. Ask your sales rep for details.
With a Sloped Fence upgrade the panels are angled to minimize gaps beneath the fence.
These adjustable Stainless Steel Hinges connect to the post and gate frame at multiple points and in multiple directions for added strength and lifetime service.
These Premium Steel Latches connect to the post and gate frame at multiple points to distribute the load effectively. They are completely lockable.
The width of the opening determines which class of gate is needed: Walk Gate or Double Gate.
An Auto Closure is required to make your gate "pool legal". Auto Closures are designed for standard sized walk gates. They may not work for larger sizes.
An Overhead Vinyl Brace is the simplest way to add strength and stability to your gate area.
Aluminum Posts can be colour matched to the vinyl or a different shade altogether. Their strength makes them a popular choice for wider gate openings.
Larger Posts make vinyl fences stronger.
3' Wide Panels mean a stronger fence and the opportunity for less space between the bottom of the fence and the ground. It's very popular with pet-friendly families. Ask your sales rep for details.
Fascia is the trim on the side of the deck between the deck boards and skirting. It can be Single, Double, Triple, or there can be none.
Skirting is the covering on the vertical sides of your deck. Skirting can be done with 1"x6" privacy fence boards, Victorian lattice, Georgian lattice, or there can be none.
The number of Steps up to your deck is determined by the height of the main flooring. Wood Steps should be a minimum of 4' wide.
3' Wide Panels mean a stronger fence and the opportunity for less space between the bottom of the fence and the ground. It's very popular with pet-friendly families. Ask your sales rep for details.
A Continuous Top Rail goes over the posts so there is no need for post caps.
Continuous Boards cover the posts so the fence doesn't look like a series of panels.
