Manotick

Starting as low as $69/ft (3’8″h) Fully Installed the Manotick offers 2×2 pickets sandwiched with 1×4 rails.

• Wood Choices Cedar or Pressure Treated
• Pre-Staining Jarrah Brown, Natural, Mahogany Flame, or Honey Teak

  ×

  Pre-Staining Wood Tone*

  

  Pre-staining can help protect your fence from damage caused by:
  • UV Rays
  • Moisture
  • Temperature Changes
  • Contamination

  And more. Prices start at $12/ft (Wood Tone).

  Get More Information About Staining

  
  

  GET A FREE PRE-STAINED SAMPLE

  
  Also available: over 200 choices in semi-transparent, semi-solid, and solid colours.

  *Available for cedar and treated wood. No on-site staining services offered (including no touch-ups).

  Close
• Post Caps Pyramid, Gothic, Solar, or Fence-All

  ×

  Post Caps

  

  Close
• Bottom of Fence Straight, Stepped, or Custom Contoured

  ×

  Bottom of Fence – Straight, Stepped, or Custom Contoured

  

  Close
• Heights 2′ 6″, 3′ 6″, 4′ 6″, or 5′ 6″

Upgrade your posts with RotGuard Sleeves. They’re heat-shrinkable sleeves with a meltable liner that protect wood posts from rot and decay around the vulnerable ground line area. Pro-Sleeves carry a 20 year manufacturer warranty.

Wood Fence Upgrades

• RotGuard Sleeves

  ×

  RotGuard Sleeves

  
  RotGuard Sleeves are applied to posts around the vulnerable ground line area to protect them from rot and decay. They carry a 25 year manufacturer warranty. Ask your sales rep for details.

  Close
• Under-Fence Gap Protection

  ×

  Under-Fence Gap Protection

  
  Our Under-Fence Gap Protection covers up spaces at the bottom of the fence when there are changes in grade. The boards are stuck into the ground, not directly attached to the fence. This prevents the fence from heaving due to seasonal changes.

  Close
• 4′ or 6′ Wide Panels

  ×

  4′ and 6′ Maximum Wide Panels mean a stronger fence and the opportunity for less space between the bottom of the fence and the ground. It’s very popular with pet-friendly families. Ask your sales rep for details.

  Close
• Custom Contour to Close Off Gaps

  ×

  Custom Contour to Close Off Gaps

  Custom Contouring is an elegant way to handle changes in grade and the gaps they cause underneath fences.

  In the example below we have two six foot high gates with a sharp change in grade between them. An 8′ high panel was ordered for the middle section and it was cut on site along the bottom to match the lay of the land.

  If there are multiple sections in the sloping area, or they are between other fence panels instead of gates the principle is the same: start with the highest fence height needed and cut the panel along the bottom to shape as needed.

  

  Close
• Sloped Fence

  ×

  Sloped Fence

  With a Sloped Fence upgrade the panels are angled to minimize gaps beneath the fence.

  Close
• Milled Posts

  ×

  Milled Posts

  

  Our Milled Post Upgrade is sometimes confused with our Cap Option. The difference: With milled, the cap shape is carved directly out of the post for a one piece assembly that has no seam.

  Close
• Larger Posts

  ×

  Larger Posts

  
  Available in 6×6 and 8×8 sizes as well as wrapped, Larger Posts add to the look and increase the strength of the overall fence/gate system. Fluting is an ornate touch that can be added to wrapped posts.

  Close
• Screw Piles

  ×

  Screw Piles

  Screw Piles are posts that are turned into the ground by machine as opposed to the usual digging and cementing process. They are a requirement for most deck permits.

  Close
• Bedrock Attachment

  ×

  Bedrock Attachment

  
  Bedrock Attachments may be required to install posts in unusually rocky conditions. Bars are welded to the piles and inserted into holes drilled in the bedrock.

  Close

More Info

• Lighting Catalogue
• General Wood Info
• Western Red Cedar FAQ
• Treated Lumber FAQ
• View Schematic