Industrial Chain Link

Generally prices for 6′ high Industrial Chain Link start at $45/ft for Fully Installed. The numbers can vary depending on the requirements of your particular job. Call 613-736-1122 for more details.

Our Industrial Chain Link Fence includes galvanized mesh (typically 2″ by 9 gauge).

• Bottom of Fence Straight, Sloped One Way, Sloped Two Ways (Upgrade)

  ×

  Handling Grade Changes

  

  Close
• Heights 3′,4′, 5′, 6′, 7′, 8′, 10′, or 12′

Upgrades

• Schedule 40 Pipe

  ×

  Schedule 40 vs Light Wall

  
  Schedule 40 Pipe has the same outer diameter as Light Wall, but its walls are thicker.

  Close
• Radiused Fence

  ×

  Radiused Fence

  
  Chain link can be Radiused to curve around obstacles.

  Close
• Industrial Grand Post Spacing

  ×

  Industrial Grand Post Spacing

  

  The simplest and most cost effective way to make a stronger chain link fence is to add line posts. They strengthen top rail support and reduce top rail sagging. We strongly suggest this option if 1) you plan to add privacy slats or 2) your fence will have snow piled near it (NEVER on it) or 3) your fence has long, straight runs where top rail sagging can become more obvious.

  Close
• Sloped Two Ways

  ×

  Sloped Two Ways Upgrade

  

  Close
• Heavy Posts and Rails

  ×

  Heavy Posts and Rails

  

  If your fence is going to be pushed a little more than usual larger Posts and Rails are the answer. They cost a few dollars more per foot but it’s less expensive than replacing the entire fence in only a year or two because it wasn’t strong enough for its particular application.

  Close
• Add a Continuous Bottom Rail

  ×

  Add a Continuous Bottom Rail

  

  Add a Continuous Bottom Rail is a more economical version of Add a Rail. A top rail is tied to the outside of the fence along the bottom.

  Close
• Add a Rail

  ×

  Add a Rail

  

  Adding a rail is a popular feature with pet owners. It makes it harder for dogs to dig under the fence and escape.

  Close
• Screw Piles

  ×

  Screw Piles

  Screw Piles are posts that are turned into the ground by machine as opposed to the usual digging and cementing process. They are a requirement for most deck permits.

  Close
• Bedrock Attachment

  ×

  Bedrock Attachment

  
  Bedrock Attachments may be required to install posts in unusually rocky conditions. Bars are welded to the piles and inserted into holes drilled in the bedrock.

  Close
• Overlapping Mesh

  ×

  Overlapping Mesh

  
  Overlapping Mesh is used to cover gaps where small animals could otherwise get through.

  Close

More Info

• About Chain Link Mesh
• General Chain Link Info
• Do-It-Yourself Instructions
• View Schematic