- Wood Choices Cedar
- Pre-Staining Jarrah Brown, Natural, Mahogany Flame, or Honey Teak
- Colours Choice of Colours
- Post Caps Pyramid, Gothic, Solar, or Fence-All
- Bottom of Fence Straight, Stepped, or Sloped
- Heights 3', 4', 5', or 6'
Upgrade your posts with Postsaver Pro-Sleeves. They're heat-shrinkable sleeves with a meltable liner that protect wood posts from rot and decay around the vulnerable ground line area. Pro-Sleeves carry a 20 year manufacturer warranty.
Iron fence panels are custom contoured to the grade by raising the bottom rail 1' and cutting the pickets as required.
Available in 6×6, 8×8, 10×10 Dimensional as well as Wrapped and Fluted, Larger Posts add to the look as much as they add to the strength of the overall fence/gate system.
Our Steel Hand Rails add a little something for seniors, curving or bending to fit almost any angle and attaching to almost any post or wall surface.
Fascia is the trim on the side of the deck between the deck boards and skirting. It can be Single, Double, Triple, or there can be none.
Built-Up Posts are standard 4x4 posts wrapped with 1x6 boards. It's a more substantial, decorative look.
Majestic Pillar Posts project strength and luxury.
Screw Piles are posts that are turned into the ground by machine as opposed to the usual digging and cementing process. They are a requirement for most deck permits.
A Diagonal Floor Board pattern adds elegance to any deck.
Chain link can be Radiused to curve around obstacles.
The simplest and most cost effective way to make a stronger chain link fence is to add line posts. They strengthen top rail support and reduce top rail sagging. We strongly suggest this option if 1) you plan to add privacy slats or 2) your fence will have snow piled near it (NEVER on it) or 3) your fence has long, straight runs where top rail sagging can become more obvious.
If your fence is going to be pushed a little more than usual Heavy Posts and Rails are the answer. They cost a few dollars more per foot but it's less expensive than replacing the entire fence in only a year or two because it wasn't strong enough for its particular application.
Add a Continuous Bottom Rail is a more economical version of Add a Rail Between Posts. A top rail is tied to the outside of the fence along the bottom.
Adding a rail is a popular feature with pet owners. It makes it harder for dogs to dig under the fence and escape.
Chain Link walk gates come with a set of adjustable Gate Hinges.
Chain Link walk gates come with a lockable Finger and Latch system.
An Auto Closure is required to make your gate "pool legal". Auto Closures are designed for standard sized walk gates. They may not work for larger sizes.
A Gate Scroll adds a decorative touch to the top of any chain link gate.
A double gate requires a Cane Bolt to keep the two leafs steady when the gate is closed.
Wood Walk Gates are for openings 24" to 48" wide. All Fence-All Wood Walk Gates 5' high and over include a 2x4 brace.
A Double Gate is best for entrances between 4' and 8' wide. It includes a cane bolt that stabilizes one of the gates in a fixed position. All Fence-All Wood Double Gates 8'w and wider include a 4x4 brace.
Our Under-Fence Gap Protection covers up spaces at the bottom of the fence when there are changes in grade. The boards are stuck into the ground, not directly attached to the fence. This prevents the fence from heaving due to seasonal changes.
A Continuous Top Rail goes over the posts so there is no need for post caps.
4' and 6' Maximum Wide Panels mean a stronger fence and the opportunity for less space between the bottom of the fence and the ground. It's very popular with pet-friendly families. Ask your sales rep for details.
With a Sloped Fence upgrade the panels are angled to minimize gaps beneath the fence.
The Add-a-Rail Upgrade increases the strength and durability of any wood fence. For fences that look the same front and back you can order a rail set (i.e., two mid rails, one for each side) or choose just the one in back.
For more info see the video 
Our Milled Post Upgrade is sometimes confused with our Cap Option. The difference: With milled, the cap shape is carved directly out of the post for a one piece assembly that has no seam.
These Premium Steel Hinges include hinge pins in case the gate needs to be temporarily removed.
Wood Gates come with a lockable Finger and Paddle Latch system that allows for access from either side of the gate.
An Extra Gate Handle is the solution if you're looking for easy access from both sides.
An Overhead Gate Brace is a simple way to add strength and stability.
A Capped Brace adds more style to the basic Overhead Brace.
The Newport Brace is our most ornate Wood Brace option.
Dog-Eared Boards are regular boards with the corners cut off at the top for a more finished look. A Dog-Eared fence ages well because there is no curving or twisting at the corners.
Our Under-Fence Gap Protection covers up spaces at the bottom of the fence when there are changes in grade. The boards are stuck into the ground, not directly attached to the fence. This prevents the fence from heaving due to seasonal changes.
pAluminum Posts can be colour matched to the vinyl or a different shade altogether. Their strength makes them a popular choice for wider gate openings.
Larger Posts make vinyl fences stronger.
These adjustable Stainless Steel Hinges connect to the post and gate frame at multiple points and in multiple directions for added strength and lifetime service.
These Premium Steel Latches connect to the post and gate frame at multiple points to distribute the load effectively. They are completely lockable.
The width of the opening determines which class of gate is needed: Walk Gate or Double Gate.
An Auto Closure is required to make your gate "pool legal". Auto Closures are designed for standard sized walk gates. They may not work for larger sizes.
An Overhead Vinyl Brace is the simplest way to add strength and stability to your gate area.
Iron Walk Gates come with a set of adjustable Post and Frame Collars.
Folding Gates have special hinges that allow the gate panels to be folded into each other. It's a helpful modification to wider gates when space is at a premium.
Iron Walk Gates come with a lockable Finger and Catch System.
Most iron gates can be Straight or Arched. The upper photo shows a Straight Staten Gate and the lower photo shows an Arched Stamford Gate (arched gates typically rise 6" above the the height of the fence).
Add an Ornamental Gate Handle w/Mount Box. Comes complete with an attractive cylinder and key locking system. Note: can't be added to gates that are already installed.
Protect your toddlers with a Child-Proof Magnetic Latch. The height of the Unlock Button keeps it well out of reach of curious youngsters.
Our Estate Gates have options for gate operators, automated telephone systems, custom sized pillar posts, specialty hardware, and our "wood over steel" or "wood over aluminum" framing techniques.
For taller railings a Secondary Vinyl Rail can be added for extra safety and security on steps.
Larger Posts are often the perfect upgrade to complement the architecture of your home.
An Angle Mount is the answer when the angle between panels is more than a 90° corner.
Rails are Custom Bent, a helpful option when there are existing posts set back from the edge of steps as shown in the above diagram. Without the bend, the bottom rail would have to attach higher up on the post (see dotted red line) to clear the lip. The bend puts the system back in line.
Add a Standard, Classic, Grand or Royal topper in any of the colours available (Classic Teak is shown above). Pickets next to posts extend all the way to the topper.
For most styles, 6' Wide Spacing is appropriate for narrower panels and a stronger fence. For Rosemount, a 4' Wide Spacing works even better because the 4' by 8' lattice panel standing on its end is a perfect fit. Ask your sales rep for details.