Deer & Wildlife Fence

Deer & Wildlife Fence keeps wildlife in, or out. It provides protection for plants, gardens, or animals and prevents diseases and ticks from entering your property, reducing the need to use pesticides.

• Mesh 2096 (20 strands x 96″h)
• Wire 12-1/2 ga. Class 3
• Knot Type Hinge Joint

  ×

  Hinge Joint

  
  This economical knot choice is formed by wrapping vertical stay wires around the line wires at each intersection. Absorbs animal impact without damage. Acting as a hinge, allowing the fence to spring back into shape and give under pressure.

  Close
• Typical Line Posts 6×6 Treated Spaced @ Maximum 10′ Apart
• Typical Terminal Posts 8×8 Ends, Corners, and Gates

Upgrades

• 6″ Stay Wire Spacing (Standard is 12″)
• Add Two 2×6 Rails (Top and Middle)
• T-Post Caps

  ×

  T-Post Caps

  
  T-Post Caps help to protect livestock and from the sharp ends of metal t-posts.

  Close
• Gripples

  ×

  Gripples

  
  Standard Gripples are used to connect rolls of agricultural wire. The exposed view top left shows the mechanism at work: wires go in from either side and are locked in place. T-Gripples (on the right) are used to connect a cut wire roll to itself after winding it around a post.

  Close
• Barbed Wire Topper
• Screw Piles

  ×

  Screw Piles

  Screw Piles are posts that are turned into the ground by machine as opposed to the usual digging and cementing process. They are a requirement for most deck permits.

  Close
• Bedrock Attachment

  ×

  Bedrock Attachment

  
  Bedrock Attachments may be required to install posts in unusually rocky conditions. Bars are welded to the piles and inserted into holes drilled in the bedrock.

  Close

More Info

• View Schematic